ihatethiscar.com — Jeep Cherokee Wiring Diagrams

░▒▓ ABOUT THIS TOOL ▓▒░

Generates laser/plasma/waterjet-ready .DXF cut files for custom panels that mount Milwaukee PACKOUT tool system organizers alongside MOLLE webbing attachment points. Configure rows, columns, and dimensions below — the panel auto-sizes to fit. Download the DXF and open it in your preferred CAM software (Lightburn, SheetCam, Fusion 360).Pocket geometry derived from STL analysis of Milwaukee 48-22-8485 PACKOUT plate.

PANEL PRESETS

PACKOUT POCKETS

Columns

col

Pockets across. 1–4 supported.

Rows

row

Rows of pockets. Set to 0 for MOLLE-only panel.

Side Margin

Panel edge to outermost pocket edge.

Top Flange Branding

MOLLE GRID

Rows

row

MOLLE rows. Set to 0 for PACKOUT-only panel.

Columns auto-fit to panel width: 6 columns (270 mm grid width)
Cell size: 33mm × 33mm, 45mm pitch, 5mm corner radius

MOUNTING HOLES

Corner panel mounting holes

Hole Diameter

M6=6.5mm, M8=8.5mm, 5/16in=8.0mm, 3/8in=9.5mm

LIVE PANEL PREVIEWscaled · updates instantly

CUT (red in DXF) SCORE (blue) HOLES (yellow) LOGO (magenta)

COMPUTED DIMENSIONS

Panel size	349 × 468 mm
Panel size (inches)	13.74" × 18.43"
PACKOUT pockets	3 × 2 (6 total)
MOLLE slots	6 × 4 (24 cells)
Pocket row height	126 mm
MOLLE grid height	180 mm
MOLLE grid width	270 mm
Total cut paths	31

CUT FILE NOTES

▸ CUT (Red): Full-depth profile cuts. Panel outline, slot shapes, MOLLE cells.

▸ HOLES (Yellow): Drill/pierce points. Corner mount holes + MOLLE attachment holes.

▸ SCORE (Blue): Section divider lines and logo zone. Do NOT cut through.

▸ Material: 6–10mm HDPE, 3mm steel, or 4–6mm aluminum plate.

▸ PACKOUT fit: Slot geometry matches Milwaukee 48-22-8485 adapter plate profile.

▸ MOLLE spec: 33×33mm slots, 45mm pitch — compatible with standard MILSPEC MOLLE gear.

▸ LOGO (Magenta): Irate 4×4 single-stroke engraving paths. Run as a separate engrave/score pass — do NOT full-depth cut.

EXPORT

DXF R2010 format · MM units · 4 layers (CUT / HOLES / SCORE / NOTES)
Compatible with Lightburn, SheetCam, Fusion 360, AutoCAD, LibreCAD

Filename: packout_3x2_molle_6x4_349x468mm.dxf

← Back to ihatethiscar.com